Supplier of Recycle Base Oil SN150 Serbia From Turkey

 

What is RC Base Oil?

RC Base Oil typically refers to Refined Crude Base Oil or Recycled Base Oil — depending on regional terminology — and is a Group I base oil. These base oils are produced through solvent refining processes and contain relatively higher levels of sulfur, aromatic compounds, and unsaturated hydrocarbons compared to higher Group II/III base oils.

They are widely used in blending lubricants, especially for applications not requiring ultra-high purity, such as:

• Automotive lubricants
• Hydraulic fluids
• Greases
• Transformer oils
• Industrial oils

The Importance of Using SN150 Recycled Base Oil in Serbia

Why It Matters in Serbia

• Environmental Sustainability
  Serbia is part of the EU’s broader push toward circular economy and waste minimization. Re-refining SN150 helps reduce environmental contamination and aligns with local priorities to protect water and soil.
• Energy & Resource Efficiency
  Serbia relies heavily on imports for crude oil. Recycling SN150 offers a more energy-efficient and sustainable alternative that eases reliance on raw imports.
• Economic Advantages
  Using recycled base oil can reduce production costs for lubricant manufacturers. Plus, it can foster job creation in emerging recycling and re-refining sectors, contributing positively to Serbia’s economy.
• Regulatory Alignment & EU Aspirations
  Serbia is advancing regulations compatible with European environmental norms. Adopting recycled SN150 helps companies align with existing and potential future legal standards.
• Industrial Relevance
  SN150 is versatile—used in engine oils, hydraulic fluids, greases, metalworking fluids, transformer oil

Application of recycled base oil SN150 in Serbian industry

1) Automotive & Fleet Maintenance

Engine oils (legacy gasoline/diesel, off-road)

• Role: viscosity builder for SAE 10W/30/40 with SN500/BS150 + VI improver.
• Targets: KV100 9–14 cSt (grade-dependent), VI ≥ 95, TBN via additive.
• Notes: Best for older fleets, municipal vehicles, agricultural diesel where OEM permits Group I systems.

ATF/gear pre-blends (non-friction modified)

• Role: diluent for additive packages; finish with lighter cut if needed.
• Targets: Oxidation stability, foaming control.

2) Industrial & Manufacturing

Hydraulic oils (ISO VG 32/46/68)

Role: base for anti-wear (AW) formulations (ZnDTP/ashless).

Targets: VI ≥ 95–105, air release ≤ 10 min, demulsibility 40–40–0 (15 min), FZG ≥ 10.

Use cases: presses, injection molding, CNC hydraulics, mobile hydraulics in construction/mining.

Industrial gear oils (ISO VG 68/100/150)

Role: with EP sulfur-phosphorus packages; SN150 as diluent with SN500.

• Targets: FZG ≥ 12, micropitting resistance (where required).
• Use cases: cement plants, steel rolling lines, conveyor gearboxes.

Turbine & circulating oils

• Role: base for R&O oils in power gen & paper/steel circulation systems.
• Targets: Low sludge/varnish tendency, rapid air release, RPVOT per spec.

Compressor oils (reciprocating)

• Role: straight-grade R&O; for screw/rotary typically prefer Group II—SN150 can be used where OEM allows.

Spindle & way oils

• Role: light viscosity fraction (blend with SN70/neutral light if available); tackifier/friction modifier for way oils.

3) Metalworking & Fabrication

Neat cutting oils / machining

• Role: carrier with polar EP/extreme-pressure and fatty packages.
• Targets: low misting, proper flash point (≥170 °C typical), copper corrosion ≤1b.

Soluble/emulsifiable oils

• Role: SN150 as oil phase for semi-synthetic/cutting emulsions.
• Targets: emulsion stability, hard-water tolerance (Danube basin waters), bio-resistance.

Rolling oils (steel/aluminum – light duty)

• Role: where viscosity and cleanliness allow; check ash and aromatic content.

4) Construction, Mining, and Aggregates

Diesel engine oils (legacy), hydraulic oils, gear oils

• Role: same as above; strong fit for loaders, excavators, crushers, cement mixers.
• Note: Dusty environments demand robust dispersancy/filtration—spec additive treat rates accordingly.

5) Agriculture & Food Supply Chain (non-food contact)

UTTO/STOU-style fluids (older equipment)

• Role: blend component toward SAE 10W-30 viscosity window with friction modifiers.
• Targets: wet-brake chatter control, oxidation stability.

General purpose R&O oils

• Use: conveyors, bearings, chains in grain silos, mills (non H1).

6) Transport & Logistics (Road, Rail, Inland Waterways)

Marine/inland vessel lubes (Danube/Sava craft)

• Role: base for TPEO trunk piston oils in older low-speed diesels, gear oils for deck equipment (where allowed).

Rail/industrial greases

• Role: SN150 as grease base oil with lithium/lithium-complex soaps (NLGI 1–3).
• Targets: penetration per ASTM D217, dropping point (≥180–250 °C depending on thickener).

7) Power Generation & Utilities

Transformer/insulating oil (limited)

• Note: Naphthenics generally preferred for low pour & dielectric performance; SN150 can serve in non-critical insulating or heat-transfer roles where specs allow.

Heat-transfer oil (non-synthetic)

• Role: light fraction with thermal stability improvers; monitor coking tendency.

8) Rubber, Plastics & Chemical Processing

Process/Extender oils (non-food/consumer contact)

• Role: plasticizer in rubber compounding, defoamer carrier.
• Targets: control PCA/PAH content per customer policy.

Mold release & defoamer carriers

• Role: SN150 provides film and solvency; add silicone or specialty additives as needed.

9) Wood, Paper & Cement

Saw guide oils, chain oils, kiln gear oils

• Role: EP/R&O packages; SN150 helps flow in colder months.

Circulating oils for paper machines

• Targets: water separability, foam control, cleanliness.

Specification of Supplier RC Base Oil Serbia(SN150):

 

 

TDS of Recycled Base Oil SN 150-1